Packing
Hydraulic Seals
- Rod, piston, rotary and flange seals, guiding elements, wipers, Polyurethane O-rings, frame seals, flat and accumulator diaphragms.
- For construction machines industrial hydraulics, vehicle engineering and mining.
- Basic materials: All types of rubber, polyurethane, PTFE, fabric and metal reinforced elastomers and plastics.
Guiding Elements
- Guide rings and tapes prevent metallic contact between piston and cylinder with laterally acting forces.
- Guide rings in thermoplastics, filled thermoplastics and duroplastic resins with fabric reinforcement.
- Guide tapes in PTFE with bronze or carbon additives, available by the meter or cut to required length.
PTFE Seals & PEEK Thermoplastic seals
- Standard and special profiles ® in Polon
- Co-axial seals in modified PTFE with elastic pre-tensioning and guide elements for hydraulic and pneumatic cylinders where operating conditions necessitate particularly low static and motional friction.
- PEEK SEALS for Energy, oil, Gas & CPI industries.
- Flexiseals® Springassisted
Rotary Seals
- Standard and special profiles ® in Polon
- Co-axial seals in modified PTFE with elastic pre-tensioning and guide elements for hydraulic and pneumatic cylinders where operating conditions necessitate particularly low static and motional friction.
- PEEK SEALS for Energy, oil, Gas & CPI industries.
- Flexiseals® Springassisted
Flexiseals® Springassisted PTFE Seals
- Lip seals in Polon with an integral special steel spring for pretensioning.
- For static, translatory and rotational applications in aggressive fluids, at temperatures from -250 to +315ºC.
- For chemical, petrochemical industries and medical engineering and aerospace applications.
Special Profiles, Metal seals and Precision Moulded Parts
- For static and dynamic use in fluidics and process engineering, automobile and apparatus engineering, chemical and medical engineering, mineral oil extraction and processing and the aerospace industry. Metal ‘V; Ring, ‘C’ Rings, spring energised seals for cryogenic to +800ºC.
Pneumatic Seals
- Rod, piston and valve seals.
- Complete pistons, one-piece elastomer coated valve pistons.
- Rod seal/wiper sets.
- Cushioning rings. guiding elements and wipers.
- Sealing systems for micropneumatics.
- Basic materials: NBR and polyurethane compounds, PTFE, FPM, elastomers with metal or plastic carrier components, developed for use in pneumatics.
- Seal lip geometry with lubricantretention properties. Best sealing action with low friction.
Special Sealing Systems
- Ultrathan seals for compensation of the axial gap in hydraulic pumps and motors. Ultrathan sealing sets for accumulator pistons.
- Seals for flanges and for connection plates on control equipment and valves.
- Ultrathan® SAE flange seals.
- Housing seals.
- Seals for automobile components: clutches master and slave units, brake equipment, shock absorbers, pneumatic shock absorbers, automobile hood actuators, starters, catalytic converters etc.
Precision O-rings
and Parbak® backup rings
- O-rings in 1800 standard sizes
- To national and international standards: DIN 3771, ISO 3601, JIS AS 568A etc.
- Manufactured in NBR, HNBR, FPM, FFKM, FVMQ, VMQ, EPDM, ACM, CR, IIR, ECO, PTFE, and AU materials.
- Approved for aerospace and military applications.
- Parbak® backup rings preent migration of O-rings into the sealing gap when under high pressures.
Bearing Isolator
- ProTechTM bearing isolator seals offer an answer for applications where improving the mean time between failure (MTBF) is critical.
- The ProTech family relies on true non-contact labyrinth seal technology to provide 100% exclusion of contaminants and 100% retention of bearing lubrication for the life of the bearing.
- Fourteen standard profiles are available to allow for ease of retrofitting most equipment.
- Metallic ProTech Millennium® profiles are available in bronze, 302 SS, 304 SS, 316 SS, and carbon steel.
- Typical size range is for shaft diameters from 0.492" (12.5 mm) to 38" (965 mm).
- ProTech has also been independently tested to IEEE IP55, IP56, IP66 and IP69k
Assembly Greases and Lubricants
- These facilitate the fitting of O-rings reduce friction and contribute to increasing the service life of O-Rings.
- Parker O-Lube: Mineral oil-based lubricant.
- Parker Super-O-Lube: Silicon-based lubricant.
O-ring & Accessories
- Clearly arranged O-rings for repair, assembly and workshop.
- 5 standard kits wit upto 500 rings in 37 sizes and various types of materials.
- In accordance with Standards: -AS 568A Standard Series - DIN 3771/ISO 3601 -MS 33656/MS 16142
JBL Precision Moulded Parts
- Extruded solid and hollow profiles in optional lengths and range of different cross-sections.
- In hardnesses from 40 to 90 Shore A.
- Materials: NBR, HNBR, EPDM, FPM, VMQ, TPR, CR IIR and other elastomers.
- Production of large series with close tolerances. For fittings, condensers, automobile industry, electrical and medical engineering (production under clean room conditions).
O-Seals
- Rubber-metal/plastic seals for static applications.
- Available in all material combinations and surface treatments of metal parts: in standard and special sizes.
- Gask-O-Seals: For aerospace and process engineering applications.
- Integral Seals: For large series production in automobile industry and fluid engineering.
- Fastener Seals. For sealing of screws and threads in automobile industry, fluid engineering and apparatus manufacture.
Silicone
- Moulded parts and seals.
- Resistant to temperatures from -115 to +250° C. Good electrical insulation and excellent physiological properties.
- Resistant to ozone, ageing and weathering.
- Manufacture of complicated geometrical shapes to close tolerances.
- In clean room conditions.
- For electronics, electrical, automobile industry & aerospace applications.
Parofluor® Seals
I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
- In perfluor rubber (FFKM).
- Resistant to nearly all chemicals at temperatures from -30°C to +320° C.
- For the semiconductor industry: Resistant to acids, no bath contamination with metallic ions.
Expansion Joints
- RM DYNEX brand fabric expansion joints are offered in a broad range of configurations and multi-layer construction types.
- Their engineered design and construction mean performance for managing thermal expansion, noise reduction, vibration, wind & seismic loads, movement absorption and system stress relief.
- Parker offers three classes of fabric expansion joints:
- Economy Styles: X275-X300, X404-X425, LX801-LX1000
- Performance Styles: E300E, E400V, C500-C1000
- Premium Styles: Mark II, Mark III, Mark V Modified, Mark V, 1200 GTA/GTB
Adhesives and Sealants
- Parker´s adhesives and sealants product line offers solutions for locking of threads, retaining of joining parts, sealing of pipes, tubes, threads and flanges and gluing.
- Technical sprays and liquids complement the portfolio by performing the following tasks: cleaning and degreasing, activating, mounting, separating, lubricating, etc.
Seals and O-Rings
Chomerics -EMI Shielding
Cable Screening
- Cho-Sorb ferrites serve for the reduction of interference associated with cables.
- They allow flow of the desired signals through the cable and switchgear and trap unwanted energies. Cho-Jac® are sheaths for protection of flat cables.
Conductive Coatings
- Cho-Shield coatings are an EMI screen for electronic components and consist of epoxy Resin, acrylates of urethane & also silver or nickel fillers.
- Cho-Shield® 2052 is a single component coating suitable for cost-effective metallization of plastic housings and components.
Laminates and Tapes
- Laminates produce conductive non-corroding surfaces in plastic housings.
- Available in strips or stamped shapes to suit customer requirements.
- The metallic foil layer (copper, aluminium, stainless steel etc.) seals and earths, whilst dielectric resistance is provided by plastic film.
- Cho-Foil® is a screening foil with adhesive applied to one side.
Thermally Conductive Materials for Electronics
- Cho-Therm , Thermally conductive and electrically isolating materials for transmission of heat from electrical components to heat sinks.
- T-Wings: Flexible heat-conductors for tightly packed switching circuits.
- Manufactured from electrically insulated thin copper strips with silicone adhesive on one side.
- Thermattach: Thermally conductive adhesive tapes for the attachment of heat sinks, e.g. on microprocessors.
- Available in Insulating and non-insulating types.
Metallic Seals
- Mesh Strip seals with knitted wire mesh in monel or tinned plated copper clad steel wire and a completely metallic or elastomer core.
- The® Combo Strip version has an additional sealing strip to provide better attachment and protection against moisture.
Conductive Adheshives and Pastes
- Ch-Bond conductive adhesives are available in two versions.
- Firstly, in solid form as 2-component epoxy resin with pure silver or silver plated copper filling and, secondly, silicone filled with the latter material.
- Cho-Bond® pastes used for filling wide joints.
- They are produced in epoxy resins, silicones and polyisobutenes in single or 2-component versions - with silver plated glass aluminium or other fillers.