Wound depth series - XTL & Honey Comb:-
- Honey Comb TM - Superior wound quality cartridge Rating - 0.5 micron to 100 micron
- XTL TM - (extended life with high dirt holding capacity Rating - 1.0 micron to 30 micron.
Flopac® - Pleated Cartridges
- These are manufactured with premium grade phenolic impregnated cellulose filter media for long service life, high flow rate & low pressure drop Rating - 0.5 micron to 30 micron.
ProbondTM
- Resin bonded Series unique, proprietary design to maximise particle removal and service life in viscous fluid filtration Rating - 2.0 micron to 150 micron.
Poly-MateTM - Pleated Polymate
- Cartridges incorporate unique combinations of Polypropylene melt blown and spun bonded media to provide high surface area and nonfibour releasing filtrating.
- Rating - 0.5 micron to 30 micron Back washable pleated cartridges are also available.
MegabondTM
- Absolute rated cartridges with fixed pore structure, thermally bonded polypropylene fibers. Rating - 1micron to 120 micron.
Glass MateTM
- These are absolute rated with proprietary glass fiber media Rating - 0.5 micron to 40 micron.
DurabondTM
- Rigid thermally bonded cartridge with high strength Rating - 1 micron to 100 micron.
Abso Mate®
- These are absolute rated with proprietary melt blown media and are all polypropylene cartridges Rating - 0.2 micron to 70 micron.
EcobondTM
- Most economical high purity cartridges with graded density matrix of polypropylene fibers Rating - 1 micron to 50 micron.
Filter Bags
- Perform at high flow rates and is made of
- Polyester
- Polypropylene
- Viscous Rayon
- Multifilament Polyester
- Nomex
Tetpor Air Gas sterilisation
- 0.2 micron
- Assured biosecurity with absolute rated filtration
- High flow rates with low pressure drops
- Steam sterilizable to 142 C (287.6 F)
- Unique prefilter layer Tetpor Air sterilisation filter cartidges offer execptional filtration performance whilst providing the highest level of biosecurity throughout the process industry
Propor BR
- 0.2 micron
- Brevundimonas diminuta retention of LRV >5 for efficient bioburden reduction
- Additional prefilter layer gives excellent throughput to blockage
- Low binding for minimal product loss
- MURUS and DEMICAP’s can be gamma-irradiated and autoclaved
- PROPOR BR filters have been specifically designed for the fast and cost-effective bioburden reduction of pharmaceutical solutions.
Proclear GF Prefilter
- 0.2 micron
- Excellent dirt holding capacity
- Non-fibre releasing glass micorfibre media
- Long service life for maximum throughput
- MURUS and DEMICAP’s can be gamma-irradiated and autoclaved
- PROCLEAR GF filters are designed for reliable and economical removal of particulate and microorganisms from pharmaceutical fluids.
Propor HC
High capacity sterlising-grade
- High capacity sterlising-grade
- 0.2 micron
- Optimized membrane configuration allows up to ten times the throughput compared to single layer membrane products
- Integral prefilter layer can condense filter trains for greater processing economy
- Incorporates a fully validated and integrity testable 0.2 micron membrane for assurance of sterility
- Low binding for minimal product loss
- PROPOR HC sterilizing grade filters have been specifically designed for the effective and economical processing of difficult to filter solutions.
Proclear GP Prefilter
- 0.5 - 0.6 micron
- Dual layer media or increased capacity and assurance
- Maximizes retention for protection of downstream membranes
- Ideal for difficult to filter solutions
- MURUS and DEMICAP’s can be gamma-irradiated and autoclave
- PROCLEAR GP filters combine glass microfibre and polypropylene media to provide maximum protection to downstream filter membranes and equipment.
Tetpor HP Low binding sterilising-grade
- 0.2 micron
- Exceptionally low binding membrane to prevent costly product loss and process down time
- Incorporates a fully validated and integrity testable 0.2 micron membrane for assurance of sterility
- Fast flowing membrane for increased process efficiency
- TETPOR HP filter cartridges have been specially designed to minimize protein and preservative binding in the sterilization of pharmaceutical and multi-dose ophthalmic solutions.
High Flow Tetpor II
Gas sterilisation
- 0.2 micron
- Steam sterilizable up to 225 cycles at 142 °C (287.6 °F)
- Unrivalled flow rates combined with low pressure drops
- Fully validated to ASTM 838-05 for liquid bacterial challenge
- Fully validated to aerosol and viral challenge
- HIGH FLOW TETPOR II gas sterilization filters have been developed to benefit from technological advances within the manufacture of PTFE membranes. This new generation of filter sets the standard with an unrivalled combination of efficiency, flow rate and strength.
Propor SG
Sterilising - Grade
- 0.1 - 0.45 micron
- Up to 3.5 times higher flow rates than competitive sterilizing grade filters
- Fully validated and integrity testable membrane for assurance of sterility
- Low binding for minimal product loss
- MURUS and DEMICAP’s can be gamma-irradiated and autoclaved
- PROPOR SG sterilizing grade filters feature a microbially retentive polyethersulphone membrane for fast, reliable and cost-effective sterile filtration of pharmaceutical fluids.
Proclear PP Prefilter
- 0.6 - 100 micron
- Graded density polypropylene media for high capacity
- Extremely robust to withstand aggressive conditions
- All polypropylene construction
- MURUS and DEMICAP’s can be gamma-irradiated and autoclaved
- PROCLEAR PP filters are designed for a wide range of prefiltration duties within the production of pharmaceuticals and are particularly suited to applications where chemical compatibility is an issue.
Propor LR Rention of diminutive Organisms
- 0.1 micron
- Fully correlated against Ralstonia pickettii and integrity testable
- Increases retention efficiency whilst maintaining existing 0.2 micron rated system size
- Up to 2.5 times higher flow rate than competitive 0.1 micron rated filters
- MURUS and DEMICAP’s can be gamma-irradiated and autoclaved
- PROPOR LR filters have been specifically designed for high flow and effective removal of Ralstonia pickettii and other diminutive organisms.
Tetpor Liquid High resistance sterilising - grade
- 0.1 - 1.0 micron
- Superior chemical resistance of PTFE membrane combined with polypropylene hardware
- Integrity tested prior to despatch
- Validated to ASTM F838-05 methodology
- Comprehensive range of end cap configurations for retrofitting
- TETPOR LIQUID filters are particularly suitable for sterilization and particulate removal from aggressive chemicals (including acids, bases and solvents) within a wide range of critical processing industries
Cartridge filtration
- Parker microfiltration products set the highest standards for filtrate quality, product reliability and cost effective use. Parker products provide optimal solutions for food and beverage applications. Parker products are available in lengths from 4 to 40 inches and configurations to retrofit all commonly installed filter housings. Products are offered in membrane and depth media with a full range of cartridges, minicartridges and capsules to meet production, pilot and laboratory-scale requirements. Removal ratings from 0.02 to >800 μm are available.
Small & Large - Scale Disposable Filtration
- Parker domnick hunter provides a range of scaleable filtration solutions like capsules etc. Products withinthe range are constructed using the same materials of construction and our technical support team can advise on methods for the most accurate prediction of large-scale product binding and leachables.